top of page

FEATURES
Features that set the 3DP1000 apart

3DP1000 Large Format 3D Printer

 

  • Big

The 3DP1000 is truly large format, boasting a gigantic build volume with a useable area of 1 m x 1 m x 0.5 m  (39″ x 39″ x 19″)

 

  • Economical

With platforms under $20,000, stepping up in size and performance is within reach without large capital investment

 

  • Accurate

Consistently produce high quality Fused Filament Fabrication (FFF) output with layer resolutions under 100 microns

 

  • Robust

Designed by engineers and built for engineers, the 3DP1000 is built to last with industrial strength actuators and mechatronics

The 3DP1000 is BIG

 

With dimensions of 1m x 1m x 0.5m (39″ x 39″ x 19″), the huge print volume is 74x greater than the average desktop 3D printer.

*74x is based on the average build volume of a typical desktop 3D printers.

Industrial Strength Mechatronics

 

  • Mechanics – SIMO® Series Linear Motion Actuators from PBC LInear®

 

  • Constant Force™ lead screws with anti-backlash nuts provide repeatable accuracy over the life of the system

 

  • Utilizing Applied Motion Products integrated stepper motor / amplifiers for simplified wiring eliminating failed cable management

Open Source Flexibility

 

  • Use the slicing and software of your choice including options like Repetier, Slic3r, or Simplify 3D™

  • Don’t be tied to a single supplier … Use any 3mm diameter filament with a melt point below 295ºC

Multiple Material Capability

 

  • 110v printers have bed temperatures up to 70°C

 

  • Ideal for materials such as PLA and NinjaFlex®

 

  • 220v printers bed temperatures exceed 70°C

 

  • For use with materials such as PLA, ABS, Nylon, HIPS, PVA, and more

 

  • 3mm diameter filament with melt points below 295°C

All Metal Extruder Heads

 

Get consistent performance from industrial all metal hot ends

 

  • Melt points up to 295°C

 

  • Smoothly lay down a consistent smooth bead

 

  • High quality layer resolutions below 100 micron

Easy Bed Leveling

 

  • Easily access all of the adjustments to level the bed

 

  • Pre-sliced calibration prints identify where adjustments are needed

 

  • Lock the bed in place to hold postion

Sensors

 

  • Multiple postion sensors protect against over travel crashes

 

  • Easily set home postion and Z-height location

 

Download the 3DP1000 Date Sheet

 

 

 

bottom of page